Cisco Boiler Service Co., Inc.

Osage

Back to main page:

Back to one page:

Three pass design assures maximum heat transfer with low stack temperature resulting in hign operating efficiencies and low operating costs.
Completely assembled package has refractory lined base, mineral fiber insulation with enamel finished jacket, factory assembled controls, burners, and fuel trains.
Through factory firetesting, the completed boiler/burner package is subjected to a rigorous factory test to check each electrical component for proper operation and to adjust the fuel/air ratio for smoother operation.
Optional demestic hot water heating coils, are available for both low pressure steam and hot water boiler applications.
Front smokebox access cover allows for fireside access without burner removal, or disconnecting electrical or fuel lines. Access cover and smokebox are lined with ceramic fiber to reduce heat loss and weight.
Castable refractory for the firebox base poured in place and securely anchored to the structural steel base provides long life and reduced heat loss.
Waterside access is provided by 3" x 4" handholes located (1) at the line of the crown sheet, (1) at the top of the furnace, and (1) 3" x 4" handhole or 12" x 16" manway on the top centerline.
The rear access cover allows for inspection and tubes without the removal of the stack. On boilers with 441 sq. ft. of heating surface and larger, a 17" rear access plug allows for firebox and refractory inspection.

To Top Of Page: