Cisco Boiler Service Inc., Co

Industrial Combustion Burners

LND/Series Product Information
Burner Sizes 84S, 84P, 105

Back to main page:

Back to LND Series Burners General Information

To: LND Series Dimensions For Burner Sizes 84S, 84P, 105

42, 54, 63	145S, 145P, 175	210,252,300
315, 336	378, 420

Capacities and Specifications			Burner Size
			84S	84P	105
Oil Input (U.S.G.P.H.)(See Note 1)			45	53	60
Gas Input (M.BT/HR.)(See Note 2)			6,300	7,350	8,400
Boiler Horsepower @ 80% EFF. (See Note 3)			150	175	200
Maximum Steam Capacity @ 80% EFF. 212 Deg F (LBS./HR.)(See Note 3)			5,177	6,039	6,902
Metering Unit & Compressor Module Motor HP	LNDL, LNDLG Metering Integral Oil/Air Unit - 3 Phase		1	2	2
	LNDM, LNDMG Metering Integral Oil/Air Unit - 3 Phase		2	2	2
	LNDE, LNDEG	Oil Metering Unit 3 - Phase	1/2	1/2	1/2
		Air Compressor Module - 3 Phase	3	3	3
Nozzle Line Heater. LNDM, LNDMG, LNDE, LNDEG			5 KW	5 KW	5 KW
Circulating Loop Oil Pressure Requirements (P.S.I.G.)			15	15	15
Standard Gas Train Size (Inches)			2 1/2	2 1/2	3
Minimum Gas Pressure Requirements (Inches W.C.)(See Note 4)		Train Inlet	14.9	20.7	2 PSI
		Manifold	7.0	10.0	13.0
Blower Motor Horsepower (See Note 5)		Model "S"	5	-	-
		Model "P"	-	10	15
FGR Line Piping Size (Inches)			6	6	6
Recommended Combustion Chamber Dimensions (Inches)		Length	65	65	74
		Width	34	34	38
		Centerline Height	16	16	19
Approx. Shipping Weight			1,150	1,200	1,300
Notes
1. Oil input based on No.2 oil at 140,000 Btu/gal
2. Gas input based on natural gas at 1,000 Btu/cu.ft and 0.60 specific gravity
3. Boiler overall efficiency of 80% estimated. Industrial Combustion does not guarantee overall boiler efficiency.
4. Gas pressures based on zero furnace pressure with standard U.L. train inlet. For total pressure required, add furnace pressure.
5. Impeller and motor H.P. is based on altitudes up to 2000 feet above see level. For impellers and motor sizes at higher altitudes, and 50 cycle applications, consult factory. For higher furnace pressures, consult factory. Standard motor voltages are 208-230-460/3/60.

Type of fuel determines the model designation.
Model	Fuel
LNDG	Gas
LNDL	No. 2 Oil
LNDLG	Gas/No. 2 Oil
LNDM	No. 2 - 5 Oil
LNDMG	Gas/No. 2 - 5 Oil
LNDE	No. 2 - 6 Oil
LNDEG	Gas No. 2 - 6 Oil

To Top of Page: